BLP-LS-EE-Product-Catalog-ONLINE - Flipbook - Page 79
-CP
BLEM-CP-CW
W
Outdoor-rated
CONSTANT-POWER
OUTDOOR-RATED
EMERGENCY LED DRIVER
STANDARD
STANDARD
ILLUMINATION
MOUNTING
•
Works with or without an AC Driver to convert new or
existing LED fixtures into unobtrusive emergency
lighting.
•
•
Provides constant power output to the load during
emergency mode operation.
•
UL Listed for factory or field installation.
•
Can be operated as NORMALLY-ON, NORMALLY-OFF
or SWITCHED LOAD.
•
Suitable for wet locations (-20°C - 50°C).
•
Five year warranty on all electronics and housing.
•
Ideal for use with canopy lights, garage lights and any
outdoor fixture that needs emergency lighting.
•
Meets UL924, NFPA 101 Life Safety Code, NEC, OSHA,
Local and State codes.
•
Certified to CEC under Title 20 regulations.
Suitable for installation as top, or side mount of the LED fixture.
WARRANTY/LISTING
ELECTRICAL
DIMENSIONS
•
Universal 120-277V, 50/60 Hz input.
•
Charge/Power "ON" LED indicator light and push-to-test
switch for mandated code compliance testing.
•
Long-life, maintenance free, rechargeable NiCad battery.
•
Output short/overcurrent protection: Electronic limiting, with
normal operation resuming upon removal of fault.
•
90-minute minimum emergency operating time over full
temperature range.
•
Output classification: Class 2 Compliant.
•
Surge protection: Per C62.41 (TVS).
•
Input overcurrent protection: Fusible link.
•
24 hour maximum battery recharge time.
10"
8-¼"
8-¼" 5-½"
•
Low-profile, unobtrusive design.
•
LED illuminated and remote mounted test switch.
•
Sealed and gasketed, powder-coated, die-cast aluminum housing.
•
Provided with 2-ft flex conduit and conduit hub.
2"
2"
Sample Part Number: BLEM-CP-CW
ORDERING INFORMATION
MODEL
BLEM-CP-CW
OUTPUT POWER
(blank)
17.0 Watts
740.964.1198 • BESTLIGHTING.NET • ORDERS@BESTLIGHTING.NET
79
EMERGENCY BACKUP
HOUSING
